Figure 1.47 [Add Sb/Iou To Partition] Window; Table 1.70 Display Items And Set Items Of [Add Sb/Iou To Partition] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

FIGURE 1.47 [Add SB/IOU to Partition] Window

Remarks
Radio button is attached for the display of each Free SB and IOU, and it is not possible to select more than
one at the same time.
In case of eight Socket Model, check whether SB in which one CPU can be mounted, is not mounted in the
partitions of two or more SBs.

Only when one partition is configured by one SB, one CPU can be mounted for one SB.

When one partition is configured by multiple SBs, it is mandatory to mount two CPUs for each SB in the
partition.
If the maintenance mode (Hot Partition Maintenance, Warm System Maintenance or Cold system
Maintenance) is set, only the user (Maintenance person, Administrator privilege) who sets the maintenance
mode can operate this mode.
In case of the partition other than the maintenance target, a message is displayed and operation is not
possible.

TABLE 1.70 Display Items and Set Items of [Add SB/IOU to Partition] Window

Items
Free SB
Status
Number of CPUs
Memory
Free IOU
Status
Number of PCI-Express slots
"DR"
Displays the SB in the free status (Status which does not belong to any
partition)
Displays the status of the SB.
Displays the number of CPU mounted on the SB.
Displays the amount of memory mounted on the SB.
Displays the IOU in the free status (Status which does not belong to any
partition)
Displays the status of the IOU.
Displays the number of PCI-Express slot of the IOU.
Description