PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
FIGURE 5.59 Screen display example of a boot option name change (4)
10. Exit this menu by performing the following operation.
- To save the changes to settings and exit this menu, select [Commit Changes and Exit] and press the
[Enter] key.
- To exit this menu without saving the changes to settings, select [Discard Changes and Exit] and press
the [Enter] key.
11. Confirm that the boot option was added successfully by using the following procedure.
a. Start the [Boot Manager] menu from the Boot Manager front page.
The menu shown in
b. Confirm that the menu displays the added boot option at the bottom.
FIGURE 5.60 Example of display of the [Boot Manager] menu
448
appears.
C122-E110-10EN