PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Are you sure you want to NMI to Partition#%d? [Y/N]:
The specified parameter is invalid.
The specified partition number is invalid.
Unable to NMI the partition#%d.
Command Failed. Code=0x%04X, 0x%02X
Unable to execute this command on a standby MMB.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to NMI the Partition#n because you have not authority to operate this partition.
Unable to NMI the partition(s) because the partition which does not have authority to you is included
in the specified parameter.
2.2.9
remove partition
The remove partition command removes the specified SB, IOB, or GSPB from the specified partition.
If the specified partition does not contain the specified SB or IOB, the command cannot be executed .
Remarks
If the target is an IOB or GSPB, the command must have A/B specified.
Privileges: Administrator
(1) Syntax
remove partition <partition#> SB <SB#x> {quiet}
remove partition <partition#> IOB <IOB#x>[A|B] {quiet}
remove partition <partition#> GSPB <GSPB#x>[A|B] {quiet}
(2) Options
quiet: This option executes the command without user interaction.
(3) Usage example
- Example: Removing SB#3 from partition#2 on the PRIMEQUEST 1800E
# remove partition 2 SB 3
Are you sure to continue removing SB#3 from Partition#2? [Y/N] Y
Removing SB#3 from Partition#2 has been completed successfully.
#
- Example: Removing IOB#1A from partition#2 on the PRIMEQUEST 1800E.
# remove partition 2 IOB 1A
235
C122-E110-10EN