Web-Ui Menus In Maintenance Mode (Maintenance Personnel) - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Navigation 1st level
bar
Backup/
Restore
Configuration
Maintenance
Wizard
1.1.12

Web-UI menus in maintenance mode (maintenance personnel)

This section outlines the Web-UI menus that are available to maintenance personnel (Administrator or CE
privileges) in maintenance mode.
The maintenance mode column has the following items. For details on the maintenance mode, see
menus in maintenance mode.
- Hot System: Hot System Maintenance (Target unit not included in a partition)
- Hot Partition: Hot Partition Maintenance (Target unit in a running partition)
- Warm System: Warm System Maintenance (Target unit in a powered off partition)
- Cold System: Cold System Maintenance (All partitions powered off, breaker on), and Cold System
Maintenance (All partitions powered off, breaker off)
The meanings of abbreviations in the table are as follows:
RW: The account user can refer to and set information in the window.
RO: The account user can only refer to information in the window.
N/A: The account user cannot view the menu and submenu.
*1 The account user can operate partitions not in maintenance mode in this window.
*2 The account user can operate only partitions in maintenance mode in this window.
*3 The SB is neither a Home SB nor Reserved SB. Alternatively, the SB is the Home SB in the Power Off status
in a partition in the Standby status.
*4 The partition is in the Standby status.
2nd level 3rd level
Backup/
Restore MMB
Configuration
53
Maintenance Privileges
mode
Cold System RO
RW
Hot System RO
Hot Partition RO
Warm System RO
Cold System RO
Remarks
[Backup MMB...]
is not affected by
maintenance
mode.
[Restore MMB...]
can be operated
only by
maintenance
personnel.
1.1.6 Web-UI
C122-E110-10EN