PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
FIGURE 5.103 Changing the logo display time (2)
3. Enter a numerical value to specify the logo display time.
The value range in seconds is 0 to 65535. Input with keys other than numeric keys is not possible. The entered
value cannot be outside the range. Even if the entered value is invalid, no error message appears.
- Press the [Enter] key to confirm the entered numerical value.
- Press the [Esc] key to cancel the entered numerical value.
4. To save the changes to settings and exit this menu, select [Commit Changes and Exit] and press the [Enter]
key.
To exit this menu without saving the changes to settings, select [Discard Changes and Exit] and press the
[Enter] key.
498
C122-E110-10EN