Figure 5.40 Operation Screen For Iscsi Environment Configuration (2); Table 5.31 Displayed Contents Of The Menu Selection Area - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
3. The screen shown in

FIGURE 5.40 Operation screen for iSCSI environment configuration (2)

FIGURE 5.40 Operation screen for iSCSI environment configuration
TABLE 5.31 Displayed contents of the menu selection
Set each item by moving the cursor to the item and making a setting.

TABLE 5.31 Displayed contents of the menu selection area

Item
Enable iSCSI
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
FIGURE 5.40 Operation screen for iSCSI environment configuration (2)
Set [Enabled] or [Disabled] for the iSCSI boot setting.
- Enabled
- Disabled
The default is Disabled.
Setting Enabled displays [X].
Set [Enabled] or [Disabled] for DHCP.
- Enabled
- Disabled
The default is Disabled.
Setting Enabled displays [X].
Set the IP address on the iSCSI Initiator side.
This item is not displayed when DHCP is [Enabled]. It is available
when DHCP is [Disabled].
The default is 0.0.0.0.
Remarks
If any value entered for the IP address or subnet mask is invalid,
the [Invalid IP Address!] pop-up window appears.
Set the subnet mask on the iSCSI Initiator side.
(2)displays the items outlined in
area.
Description
425
appears.
C122-E110-10EN