Figure 1.42 [Partition Home] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

FIGURE 1.42 [Partition Home] window

1. Select the radio button of the SB that you want to set as the Home SB.
The displayed background color of an unmounted SB set as the Home SB is gray. You can switch from the
selected radio button on a grayed row to a radio button on a row that is not grayed. From a grayed row, you
can select another radio button but cannot then select the original radio button again.
If no Home SB is specified, the SB incorporated first in the partition as default becomes the Home SB.
However, when the Home SB is removed or degraded, the SB with the smallest number becomes the Home
SB.
2. Click the [Apply] button.
A confirmation dialog box appears.
3. Click the [OK] button to continue processing.
Click the [Cancel] button to cancel processing.
4. Click the [Apply] or [Cancel] button.
The browser returns to the [Partition Configuration] window.
While the power of the target partition is on, do not click the [Apply] button to change the Home setting.
Otherwise, a warning dialog box appears.
Messages
The following table lists the messages displayed in this window.
Message number
E_00022 The partition doesn't have a node.
W_00423 The partition home cannot be changed while the partition is running.
Please try to change the partition home after the partition is shutdown.
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
Message text
138 C122-E110-10EN