Web-Ui Menus; Web-Ui Menus (Administrator); Table 1.1 User Privileges; Table 1.2 Web-Ui Menus (Administrator) - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
1.1

Web-UI Menus

The available MMB Web-UI menus differ depending on the user privileges.
user privileges needed to check and operate the MMB Web-UI menus.

TABLE 1.1 User privileges

Privilege level
Administrator
Operator
Partition Operator
User
CE
The following sections outline the Web-UI menus that are available for each type of user privilege.
-

1.1.1 Web-UI menus (Administrator)

- 1.1.2 Web-UI menus (Operator)
- 1.1.3 Web-UI menus (Partition Operator)
- 1.1.4 Web-UI menus (User)
- 1.1.5 Web-UI menus (CE)
1.1.1 Web-UI menus (Administrator)
This section lists the Web-UI menus that are available with the Administrator privileges.
The meanings of abbreviations in the table are as follows:
- RW: The account user can refer to and set information and control operation from the menu.
- RO: The account user can only refer to information from the menu.
- N/A: The account user cannot view the menu and submenus.
Administrator accounts are permitted to perform all operations and checks.
Operator accounts are permitted to check the PRIMEQUEST 1000 series server status
and configure the system.
They are not permitted to manage users or change the network configuration.
With Operator privileges, you cannot:
- Manipulate the power supply from the [System Power Control] window
- Change the status of the FANs and PSUs
- Change the partition configuration
- Configure a Reserved SB
Partition Operator accounts have the same privileges as Operator accounts, except
that their privileges are restricted to specific partitions. Like Operator accounts, they
are permitted to check the system status.
Unlike Operator accounts, they are not permitted to perform some operations such as
clearing the status of an SB/IOB.
User accounts are only permitted to check the PRIMEQUEST 1000 series server
status.
They are not permitted to set system configuration information or power on or off the
partitions.
CE accounts are permitted to check the PRIMEQUEST 1000 series server status.
They are also permitted to manipulate the power supply.
TABLE 1.1 User privileges
Description
2
lists the
C122-E110-10EN