Fujitsu PRIMEQUEST 1000 Series Tool Reference page 255

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
TABLE 2.6 MMB CLI commands (CE)
Command
Power control
power off
power on
sadump
reset
nmi
Partition creation
add partition
remove partition
show partition configuration
set partition home
show partition home
set partition mirror_mode
show partition mirror_mode
set partition name
show partition name
Time-related
set date
show date
set timezone
show timezone
Network-related
set ip
set ipv6
show ip
set hostname
show hostname
set gateway
set gateway_ipv6
show gateway
show network
set http
CE
Turns the power off.
Turns the power on.
sadump instruction (Japanese only)
Hard Reset instruction
NMI interrupt instruction
Adds a partition component.
Removes a partition component.
Permitted Displays the partition configuration.
Sets the Home SB.
Permitted Displays the Home SB.
Sets Mirror mode.
Permitted Displays the Mirror mode setting.
Sets the partition name.
Permitted Displays the partition name.
Sets the date and time.
Permitted Displays the date and time.
Sets the time zone.
Permitted Displays the time zone.
Sets the management LAN address.
Sets the IPv6 management LAN address.
Permitted Displays the management LAN address.
Sets the MMB host name.
Permitted Displays the MMB host name.
Sets the gateway address.
Sets the IPv6 gateway address.
Displays the gateway address.
Permitted Displays the management LAN interface.
Sets whether to enable http service.
223
Outline
C122-E110-10EN