Figure 5.79 Changing The Order Of Priority (Change Legacy Hdd Boot Priority) (1); Table 5.59 Displayed Contents Of The Help Display Area For Operations When A Pop-Up Window Appears - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations

TABLE 5.59 Displayed contents of the help display area for operations when a pop-up window appears

Item
+ =Move Selection Up
-=Move Selection Down
<Space>=Enable/Disable Device
↑↓=Move Highlight
<Enter>=Select Entry
Esc=Exit without Save
Setting the startup source HDD (Change Legacy HDD Boot Priority)
Set the startup source HDD by using the following procedure.
1. Position the cursor to [Change the order] on the screen shown in
(Change Legacy HDD Boot Priority)

FIGURE 5.79 Changing the order of priority (Change Legacy HDD Boot Priority) (1)

2. Press the [Enter] key.
Moves the hard disk at the cursor position up by one place
in the priority order for startup.
Moves the hard disk at the cursor position down by one
place in the priority order for startup.
Enables or disables the hard disk at the cursor position.
Moves the cursor up or down.
Selects an entry.
Returns the display to the front page described in
Manager Front Page without saving the changes.
FIGURE 5.79 Changing the order of priority
(1).
471
Description
5.2 Boot
C122-E110-10EN