Set Boot Delay Time] Menu; Figure 5.99 Specifying The Boot File - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations

FIGURE 5.99 Specifying the boot file (3)

4. Press the up arrow key or down arrow key to select the operating system boot loader file.
5. Press the [Enter] key.
The file is loaded, and the operating system is started.
5.6.3

[Set Boot Delay Time] menu

Use the [Set Boot Delay Time] menu to specify the time, in seconds, that the system waits after the completion of
the UEFI diagnosis process before making a transition to the operating system startup process. The default setting
is 10 seconds. The time specified in this menu is the wait time for a key input operation. The logo screen is displayed
as shown in FIGURE 5.100 Logo screen
during this key input wait time causes a transition to the Boot Manager front page. Pressing the [Enter] key causes
an immediate transition to the operating system startup process.
during the key input wait time. Pressing a key other than the [Enter] key
494 C122-E110-10EN