Fujitsu PRIMEQUEST 1000 Series Tool Reference page 458

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
Item
Gateway
Get Target info via DHCP
Target Name
Target IP Address
This item is not displayed when DHCP is [Enabled]. It is available
when DHCP is [Disabled].
The default is 0.0.0.0.
Remarks
If any value entered for the IP address or subnet mask is invalid,
the [Invalid IP Address!] pop-up window appears.
Set the gateway IP address.
This item is not displayed when DHCP is [Enabled]. It is available
when DHCP is [Disabled].
The default is 0.0.0.0.
Remarks
If any value entered for the IP address or subnet mask is invalid,
the [Invalid IP Address!] pop-up window appears.
Determine whether to acquire the IP address and port of iSCSI
Target from the DHCP server.
This item is available when DHCP is [Enabled]. It is not displayed
when DHCP is [Disabled].
- Enabled
- Disabled
The default is Disabled.
Enter the target IQN name.
You can enter a total of 4 to 223 characters.
This item is not displayed when [Get Target info via DHCP] is
[Enabled]. It is available when DHCP is [Disabled] or [Get Target
info via DHCP] is [Disabled].
Remarks
- If the entered character string is not a relevant IQN
name, the [Invalid iSCSI Name!] pop-up window
appears.
- If the number of entered characters is insufficient, the
[Please enter enough characters Press ENTER to
continue] pop-up window appears.
- The following characters can be entered here:
0 to 9, A to Z, a to z, ! " # $ % & ' ( ) * + , - . / : ; < =
> ? @ [ \ ] ^ _ ` { | } ~
Set the target IP address.
This item is not displayed when [Get Target info via DHCP] is
[Enabled]. It is available when DHCP is [Disabled] or [Get Target
info via DHCP] is [Disabled].
The default is 0.0.0.0.
Remarks
If any value entered for the IP address or subnet mask is invalid,
the [Invalid IP Address!] pop-up window appears.
426
Description
C122-E110-10EN