Nmi - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
The specified partition number is invalid.
Unable to Reset the partition#%d.
Command Failed. Code=0x%04X, 0x%02X
Unable to execute this command on a standby MMB.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to Reset the Partition#n because you have not authority to operate this partition.
Unable to Reset the partition(s) because the partition which does not have authority to you is included
in the specified parameter.
2.2.8

nmi

The nmi command specifies an NMI interrupt to the specified partition.
If the partition specified in the parameter is not configured, the partition is ignored.
If the power to the specified partition is not on, the command has no effect on the partition.
Users with Partition Operator privileges can perform this operation only on partitions under their management.
If the specified parameters include a partition not under management, an error message appears. The specified
partition cannot be operated.
Privileges: Administrator, Operator, Partition Operator (only for a partition under
management)
(1) Syntax
nmi {partition} [<partition#> [, | -] <partition#>] {quiet}
(2) Options
partition: This option specifies an NMI interrupt to the partition identified by the specified partition#. This parameter
can be omitted.
However, even if the parameter is omitted, processing assumes that the partition parameter is specified. Therefore,
a partition must be specified.
Partitions are specified as follows:
- Specify partition numbers delimited by commas.
- Specify a range of partition numbers.
quiet: This option executes the command without user interaction.
(3) Usage example
Example: Specifying an NMI to Partition#1 as a user with Administrator privileges
Administrator>nmi partition 1
Are you sure you want to NMI to Partition#1? [Y/N]: Y
Administrator>
(4) Messages
234 C122-E110-10EN