Figure 3.12 [Ipv4 Interfaces] Window (Progress Bar Displayed); Table 3.19 Display Items In The [Ipv4 Interfaces] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 3 PSA Web-UI (Web User Interface) Operations

FIGURE 3.12 [IPv4 Interfaces] window (progress bar displayed)

TABLE 3.19 Display items in the [IPv4 Interfaces] window

Item
Interface Name
Status
MAC Address
Unit
Type
Speed
IP Address
Displays the interface name.
Displays the latest status acquired at the window display time, together with the LAN
card status and link status.
- Up: Active status
- Down: Inactive status
- Link Down: Link Down status
Displays the physical address.
Displays the PCI device identifier for the interface.
This field does not display the identifier for an interface that uses bonding, GLS, or
Teaming. Neither does it have a [Unit] link.
In the case of a VMware virtual switch interface (vswif), this field does not display
the identifier. Neither does it have a [Unit] link.
Displays the network type (type of higher-level protocol used with ARP).
- Ether: Ethernet, IEEE 802.3
- Loopback: Loopback (interface for loopback) (Linux only)
- Unknown: Unknown (Linux only)
Displays the default transmission speed in units of Mbps.
The Web-UI acquires the latest information for display in the window.
Displays the IP address.
The Web-UI acquires the latest information for display in the window.
316
Description
C122-E110-10EN