Figure 1.77 [Alarm E-Mail Filtering Condition] Window; Table 1.123 Setting And Display Items In The [Alarm E-Mail Filtering Condition] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
[Alarm E-Mail Filtering Condition] window
Clicking the [Filter] button in the [Alarm E-Mail] window displays the [Alarm E-Mail Filtering Condition] window.
You can set the filtering conditions for the events for which alarm e-mail is sent, in the [Alarm E-Mail Filtering
Condition] window.
Each item is evaluated with the AND condition.

FIGURE 1.77 [Alarm E-Mail Filtering Condition] window

TABLE 1.123 Setting and display items in the [Alarm E-Mail Filtering Condition] window

Item
Severity
Partition
Unit
Source
Sets the severity level to be displayed. Multiple options can be selected.
- Error
- Warning
- Info
Everything is selected by default.
Sets the partitions to be displayed. Multiple options can be selected.
Everything is selected by default.
Sets the units to be displayed.
The selected radio button is either [All] or [Specified].
All: Filtering by unit is not applied.
Specified: Filtering by unit can be set. Check the check boxes for the units to be displayed.
The default is All.
Used to select the sources to be displayed.
Description
202 C122-E110-10EN