System] Menu; System Status] Window; Figure 1.1 [System Status] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
1.2

[System] Menu

You can display the status of and configure the hardware components in the entire PRIMEQUEST 1000 series
system from the [System] menu.
Remarks
If [Part Number] or [Serial Number] (the content or information area) in the MMB Web-UI displays "Read Error,"
check for details on the error in 11.2 Troubleshooting in the PRIMEQUEST 1000 Series Administration Manual
(C122-E108EN). If the problem persists, contact your sales representative or a field engineer.
Before making contact, confirm the model name and serial number shown on the label affixed to the main unit.
1.2.1

[System Status] window

The [System Status] window displays the status of the whole PRIMEQUEST 1000 series system. The displayed
contents may vary depending on the system configuration.
Clicking the link for each unit displays a window containing detailed information on the unit.

FIGURE 1.1 [System Status] window

The displayed details of the unit status are as follows:
[OK]: The unit has not failed and is operating normally.
[Not-present]: The unit is not mounted. The unit is grayed out.
[Warning]: The unit status is not necessarily serious but is a potential problem in the future. is the icon indicating
this status.
[Failed]: The unit must be isolated because of an error. is the icon indicating this status.
[Degraded]: The unit can continue operating by isolating the failed component in it. is the icon indicating this
status.
Unmounted units are grayed out.
58 C122-E110-10EN