PRIMEQUEST 1000 Series Tool Reference
CHAPTER 4 PSA CLI (Command Line Interface) Operations
IPMI access failed
In some cases, even after the command completes normally, the following message appears on the standard output.
Take appropriate action as necessary.
"SNMP access failed" needs a box around it.
(5) Output file format
The information is written in the following format.
FIGURE 4.1 Output file format
(6) End status
0: Normal end
>0: Abnormal end
(7) Notes
- The file does not show unmounted MMBs.
- If you specify an output file name that already exists, the file is overwritten.
359
C122-E110-10EN