Web-Ui Menus In Maintenance Mode (User) - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Navigation 1st level 2nd leve
bar
Mainten
ance
Wizard
1.1.10

Web-UI menus in maintenance mode (User)

This section outlines the Web-UI menus that are available with the User privileges in maintenance mode.
The maintenance mode column has the following items. For details on the maintenance mode, see
menus in maintenance mode.
- Hot System: Hot System Maintenance (Target unit not included in a partition)
- Hot Partition: Hot Partition Maintenance (Target unit in a running partition)
- Warm System: Warm System Maintenance (Target unit in a powered off partition)
- Cold System: Cold System Maintenance (All partitions powered off, breaker on), and Cold System
Maintenance (All partitions powered off, breaker off)
The meanings of abbreviations in the table are as follows:
RW: The account user can refer to and set information in the window.
RO: The account user can only refer to information in the window.
N/A: The account user cannot view the menu and submenu.
*1 The account user can operate partitions not in maintenance mode in this window.
*2 The account user can operate only partitions in maintenance mode in this window.
*3 The SB is neither a Home SB nor Reserved SB. Alternatively, the SB is the Home SB in the Power Off status
in a partition in the Standby status.
*4 The partition is in the Standby status.
TABLE 1.11 Web-UI menus in maintenance mode (User)
Navigation 1st level
bar
System
System Power
Control
3rd level Maintenance
l mode
Hot System
Hot Partition
Warm System
Cold System
2nd level 3rd level
Privileges Privileges
(Same (Other
partition) partition)
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Maintenance Privileges
mode
Hot System RO
Hot Partition RO
Warm System RO
46
Remarks
maintenance
personnel.
1.1.6 Web-UI
Remarks
C122-E110-10EN