PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
TABLE 1.96 Setting and display items in the [Network Protocols] window
Item
Web (HTTP/HTTPS)
HTTP
HTTP Port#
HTTPS
HTTPS Port#
Timeout
Telnet
Telnet
Telnet Port#
Timeout
SSH
SSH
SSH Port#
Timeout
SNMP
SNMP Agent
Agent Port#
Sets Enable or Disable for HTTP.
The default is Disable.
Sets the port number used for HTTP.
The default is 8081.
Sets Enable or Disable for HTTPS.
The default is Disable.
Sets the port number used for HTTPS.
The default is 432.
Sets the length of time before a time-out due to no input causes the termination of an
HTTP or HTTPS connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Sets Enable or Disable for Telnet.
The default is Disable.
Sets the port number used for Telnet.
The default is 23.
Sets the length of time before a time-out due to no input causes the termination of a
Telnet connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Sets Enable or Disable for SSH.
The default is Disable.
Sets the port number used for SSH.
The default is 22.
Sets the length of time before the SSH connection is timed out.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Sets Enable or Disable for SNMP Agent.
The default is Disable.
Sets the port number used for SNMP Agent.
The specifiable port numbers are 161 and integers from 1024 to 65535.
Description
174
C122-E110-10EN