Fujitsu PRIMEQUEST 1000 Series Tool Reference page 198

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
If the MMB has a redundant configuration, the switched MMB will take over this virtual
IP address.
Hostname Sets the host name in FQDN format.
You can enter the following characters:
[a-z], [A-Z], [0-9], - (hyphen), . (period).
Only the above characters can be specified.
Also, the following restrictions apply:
The default is "PRIMEQUEST" + Product Serial Number.
For example, if the serial number is 1020516004, the character string is
"PRIMEQUEST1020516004".
Remarks
The setting in FQDN format is not required if you are not operating on the domain.
IP Address Sets the IP address.
Subnet Mask Sets the subnet mask.
Gateway address Sets the gateway IP address.
MMB#0 IP Address Sets the physical IP address assigned to the MMB#0 interface.
This item is available only if the system has MMB#0.
You cannot access the Web-UI from this interface.
Unless MMB#0 is mounted, the window does not display the [MMB#0 IP Address] table.
Host Name (optional) Sets the host name in FQDN format.
You can enter the following characters:
[a-z], [A-Z], [0-9], - (hyphen), . (period).
Only the above characters can be specified.
Also, the following restrictions apply:
The default is "PRIMEQUEST" + Product Serial Number.
For example, if the serial number is 1020516004, the character string is
"PRIMEQUEST1020516004".
Remarks
The setting in FQDN format is not required if you are not operating on the domain.
IP Address Sets the IP address.
Subnet Mask Sets the subnet mask.
Gateway address Sets the gateway IP address.
- The character string must begin with an alphabetic character.
- The character string cannot begin or end with the following character specified: -
(hyphen) or . (period).
- The character string must begin with an alphabetic character.
- The character string cannot begin or end with the following character specified: -
(hyphen) or . (period).
166
Description
C122-E110-10EN