5.3.1
Checking the operating condition of the physical
partition or logical domain
In the following execution example, the operating condition of the physical partition
and logical domains is checked from firmware.
Log in to the XSCF shell.
1.
Confirm that you are logged in to the master XSCF.
2.
In the following example, the showbbstatus command checks that.
XSCF> showbbstatus
BB#00 (Master) (*1)
*1 If Standby is displayed, try logging into the master XSCF again.
Execute the showpparstatus command to check the operating condition of
3.
the physical partition.
In the following example, [PPAR Status] of PPAR-ID 00 displays "Running",
which indicates that the physical partition is operating.
XSCF> showpparstatus -p 0
PPAR-ID
00
4.
Execute the showdomainstatus command to check the operating condition of
the logical domains.
In the following example, [Status] of the logical domains of PPAR-ID 00 displays
"Solaris running," which indicates that Oracle Solaris is operating.
XSCF> showdomainstatus -p 0
Logical Domain Name
primary
guest0
guest1
iodom0
iodom1
sdiodomain
sr-iodomain
5.3.2
Checking the assignment status of I/O devices
In the following execution example, the operating condition of the logical domains,
the resource usage status, and the assignment status of I/O devices are checked from
PPAR Status
Running
Status
Solaris running
Solaris running
Solaris running
Solaris running
Solaris running
Solaris running
Solaris running
Chapter 5 Preparations Required for Maintenance
67