Fujitsu PRIMEQUEST 1000 Series Tool Reference page 508

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
Device
SCSI: Indicates that the component is a SAS/SAS RAID controller.
yyyy: SCSI Target ID of the connected storage (hexadecimal)
zzzz: Logical Unit Number (LUN) of the connected storage (hexadecimal)
Fibre xxxx FC yyyyyyyyyyyyyyyy,zzzzzzzzzzzzzzzz
Description
xxxx: Indicates the Fibre Channel controller PCI bus number, device number, and function
number (hexadecimal)
yyyyyyyyyyyyyyyy: World Wide Name (WWN) of the connected storage (hexadecimal)
zzzzzzzzzzzzzzzz: Logical Unit Number (LUN) of the connected storage (hexadecimal)
Remarks
The SAS/SASRAID/ Fibre Channel controller exists at the location where the PCI bus number, device number
(segment number fixed at 0) displayed on the [Change Legacy HDD Boot Priority] menu and, the MMB Web-UI
[Seg/Bus/Dev] value match. For the physical location, see Appendix B Physical Mounting Locations and Port
Numbers in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN).
Note that when there are multiple cases of matching PCI bus number, device number, and function number, the
location is determined via SCSI Target ID or LUN in the case of SAS/SAS RAID, and via WWN or LUN in the
case of Fibre.
[Change Legacy DVD/CD Boot Priority] menu
Use the [Change Legacy DVD/CD Boot Priority] menu to specify the priority order of startup devices in a system
with multiple DVD/CD drives. Booting with the [Legacy Boot] boot option follows the priority order specified
here.
The following figure shows the display of the [Change Legacy DVD/CD Boot Priority] menu when it starts.
The screen displays information for the DVD/CD drives. If "//" is displayed at the beginning of the information for
a DVD/CD drive, the boot function of the DVD/CD drive is disabled.
(3): Function number
Details
xxxx (hexadecimal) → bbbbbbbb bbbbb bbb (binary)
(1): PCI bus number
(2): Device number
(3): Function number FC: Indicates that the component is a Fibre
Channel controller.
Displayed character strings
(1) (2) (3)
476 C122-E110-10EN