Snmp Configuration] Menu - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
(1) Menu operations
[Network Configuration] - [Refresh Rate]
(2) Window operations
1. Specify [Enable] or [Disable] in [Refresh Rate].
If you select [Enable], enter the time interval.
2. Click the [Apply] button.
This sets the information for automatic refresh.
Messages
The following table lists the messages displayed in this window.
Message number
I_00013
W_00441
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
1.5.6

[SNMP Configuration] menu

The [SNMP Configuration] menu has the following windows:
[SNMP Community] window
[SNMP Trap] window
[SNMP v3 Configuration] window
[SNMP Community] window
You can configure SNMP in the [SNMP Community] window.
You can specify up to 16 items for [Community/User] from the MMB.
Setting completed.
Range over error.
Message text
177 C122-E110-10EN