Download Ssh_Key; Power Off - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Unable to execute this command on a standby MMB.
The specified parameter is invalid.
2.2.4

download ssh_key

The download ssh_key command downloads and registers a key from the specified server. The key is the public
key used by the login user for the SSH public key certificate.
The URL syntax is as follows:
http://host/path/file
ftp://host/path/file
Privileges: User
(1) Syntax
download ssh_key <URL>
(2) Options
None
(3) Usage example
No server specified: The following message asking for input of a URL appears. Then, the system waits for input
of a URL.
Example:
# download ssh_key
URL:
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified parameter is invalid.
Specified host does NOT respond.
2.2.5

power off

The power off command powers off the entire system or the specified partition.
If the partition specified in the parameter is not configured, the partition is ignored.
If the power to the specified partition is already off, the command has no effect on the partition.
230 C122-E110-10EN