Mmb Web-Ui Settings; Setting Items In The [System Event Log Filtering Condition] Window; Table A.1 Setting Items In The [System Event Log Filtering Condition] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
APPENDIX A Lists of Settings
A.1

MMB Web-UI Settings

This section lists the defaults and specifiable values of MMB Web-UI setting items in each window.
- A.1.1 Setting items in the [System Event Log Filtering Condition] window
- A.1.2 Setting items in the [Operation Log Filtering Condition] window
- A.1.3 Setting items in the [System Information] window
- A.1.4 Setting items in the [System Setup] window
- A.1.5 Setting items in the [System Power Control] window
- A.1.6 Setting items in the [Power Control] window
- A.1.7 Setting items in the [Schedule Control] window
- A.1.8 Setting items in the [Add Schedule]/[Edit Schedule] window
- A.1.9 Setting items in the [Partition Configuration] window
- A.1.10 Setting items in the [Console Redirection Setup] window
- A.1.11 Setting items in the [ASR Control] window
- A.1.12 Setting items in the [Console Redirection] window
- A.1.13 Setting items in the [Mode] window
- A.1.14 Setting items in the [Add User]/[Edit User] window
- A.1.15 Setting items in the [Date/Time] window
- A.1.16 Setting items in the [Network Interface] window
- A.1.17 Setting items in the [Management LAN Port Configuration] window
- A.1.18 Setting items in the [Network Protocols] window
- A.1.19 Setting items in the [Refresh Rate] window
- A.1.20 Setting items in the [SNMP Community] window
- A.1.21 Setting items in the [SNMP Trap] window
- A.1.22 Setting items in the [SNMP v3 Configuration] window
- A.1.23 Setting items in the [Create CSR] window
- A.1.24 Setting items in the [Create Selfsigned Certificate] window
- A.1.25 Setting items in the [Edit User] window
- A.1.26 Setting items in the [Add Filter]/[Edit Filter] window
- A.1.27 Setting items in the [Alarm E-Mail] window
- A.1.28 Setting items in the [Alarm E-Mail Filtering Condition] window
A.1.1

Setting items in the [System Event Log Filtering Condition] window

This section lists the defaults and specifiable values of the setting items in the [System Event Log Filtering
Condition] window.

TABLE A.1 Setting items in the [System Event Log Filtering Condition] window

Setting item
Severity All selected
Default Specifiable values
- Error
- Warning
- Info
- Monitor
(More than one can be
selected.)
514
Remarks
[Monitor] appears only if you logged
in with CE privileges.
C122-E110-10EN