Figure 1.64 [Snmp Trap] Window; Table 1.102 Setting And Display Items In The [Snmp Trap] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
You can set up to 16 trap destinations.

FIGURE 1.64 [SNMP Trap] window

TABLE 1.102 Setting and display items in the [SNMP Trap] window

Item
Community/User Sets the SNMP community string for SNMP v1 and v2.
Alternatively, it sets the user name for SNMP v3.
IP Address Sets the IPv4 or IPv6 IP address of the trap destination.
SNMP Version Sets the SNMP version. (1, 2, 3)
Auth Sets the security level.
You can specify this only if [3] is selected in [SNMP Version].
With [1] or [2] selected for [SNMP Version], this item is grayed out and disabled. In
this case, the available security level will be only noauth.
Auth Type Sets the hash function to encrypt passwords.
This item takes effect only if [3] is selected for [SNMP Version]. With [1] or [2]
selected for [SNMP Version], this item is grayed out and disabled.
Auth passphrase Sets a passphrase for authentication.
This item takes effect only if [3] is selected for [SNMP Version] and [auth] or [priv]
is selected for [Auth].
- noauth: Do not use the authentication function.
- auth: Use the authentication function.
- priv: Use the authentication function and "privacy" function (data encryption).
- MD5
- SHA
Description
180 C122-E110-10EN