Figure 5.83 Example Of The [Change Legacy Hdd Boot Priority] Screen Display After A Setting Change; Table 5.60 Hdd Displayed Character Strings - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
FIGURE 5.83 Example of the [Change Legacy HDD Boot Priority] screen display after a setting
change
7. To save the changes to settings and exit this menu, select [Commit Changes and Exit] and press the [Enter]
key. To exit this menu without saving the changes to settings, select [Discard Changes and Exit] and press
the [Enter] key.
HDD identification
The HDD information displayed on the [Change Legacy HDD Boot Priority] menu is displayed as shown in
5.60 HDD displayed character
in the firmware integrated versions SA11082 and SB11071 and later.

TABLE 5.60 HDD displayed character strings

Device
SAS/SAS RAID xxxx SCSI yyyy,zzzz
Description
xxxx: Indicates the SAS/SAS RAID controller PCI bus number, device number, and function
number (hexadecimal)
strings, by disk via SAS/SAS RAID, and by disk via Fibre Channel. It is supported
Details
xxxx (hexadecimal) → bbbbbbbb bbbbb bbb (binary)
(1): PCI bus number
(2): Device number
Displayed character strings
(1) (2) (3)
475
TABLE
C122-E110-10EN