Iscsi Configuration] Menu; Figure 5.37 Screen For Operation To Allocate The Number Of Buses To The Pci Express Slot (3) - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations

FIGURE 5.37 Screen for operation to allocate the number of buses to the PCI Express slot (3)

5. To exit this menu with saving the changes, select [Commit Changes and Exit], and press the [Enter] key.
6. To exit this menu without saving the changes, select [Discard Changes and Exit], and press the [Enter] key.
5.5.5

[iSCSI Configuration] menu

Since iSCSI boot is not supported, do not use [Legacy iSCSI].
For the GSPB network port or expansion card network port set with the [Configure LAN Remote Boot] menu, you
can configure the iSCSI boot environment on a UEFI-aware operating system from the [iSCSI Configuration] menu.
The PRIMEQUEST 1800E2 displays this menu. The menu displays the network ports available for iSCSI boot. To
enable iSCSI boot from the target device, select the network port for implementing iSCSI boot and make settings.
The changes made to settings in this menu will take effect after the system reset.
The following figure shows an example of display of the [iSCSI Configuration] menu.
422 C122-E110-10EN