PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
TABLE 5.19 Displayed contents of the menu selection area
Item
(Network port information)
Commit Changes and Exit
Discard Changes and Exit
(3) Help display area for menu selection
The display of the contents outlined in
selection
depends on the cursor position.
TABLE 5.20 Displayed contents of the help display area for menu selection
Cursor position
(Network port information)
Commit Changes and Exit
Discard Changes and Exit
(4) Help display area for operations
This area displays explanations of the operation keys outlined in
area for
operations.
TABLE 5.21 Displayed contents of the help display area for operations
Item
↑↓=Move Highlight
<Enter>=Select Entry
Esc=Exit without Save
Changing the Enable/Disable setting for PXE boot
Change the PXE boot setting for each network port by using the following procedure.
1. Position the cursor to the network port whose setting you want to change.
Displayed contents
Displays the information for each network port in the system and
its PXE boot setting.
The displayed network port information is a MAC address.
Saves the changes to settings and exits this menu.
Cancels the changes to settings and exits this menu.
TABLE 5.20 Displayed contents of the help display area for menu
Device path of the selected port
Configure LAN Remote Boot
Configure LAN Remote Boot
TABLE 5.21 Displayed contents of the help display
Moves the cursor up or down.
Selects an entry.
Returns the display to the front page described in
Front Page
without saving the changes to settings in this menu.
407
Displayed contents
Description
5.2 Boot Manager
C122-E110-10EN