Uefi Shell Command List; Table 6.3 Uefi Shell Commands - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 6 UEFI Command Operations
Character
string
1>>a Appends the standard output to an ASCII file.
Remarks
You can redirect the standard output or standard error output to the same file. Note that the standard output or
standard error output cannot be redirected to multiple files at the same time.
6.1.4

UEFI shell command list

TABLE 6.3 UEFI shell commands

1000 series.
TABLE 6.3 UEFI shell commands
No. Command
name
1 cd
2 connect
3 cp
4 date
5 disconnect
6 drvcfg
7 echo
8 edit
9 exit
10 help
11 ls
12 map
13 mkdir
14 mount
15 mv
16 pci
17 reconnect
18 reset
19 rm
20 set
21 time
lists the UEFI shell commands supported by the UEFI of the PRIMEQUEST
Displays and changes the current directory.
Binds the UEFI driver to a device and starts the driver.
Copies one or more files or directories to another location.
Displays and sets the current system date.
Disconnects one or more drivers from a device.
Executes the driver configuration protocol.
Displays messages and enables or disables command echo.
Used to edit an ASCII or Unicode file in full screen mode.
Exits the UEFI shell.
Displays the command list or command help.
Displays the files and subdirectories in a directory.
Displays and defines a mapping.
Creates one or more directories.
Mounts a file system on a block device.
Moves one or more files.
Displays a PCI device or a PCI configuration space.
Reconnects one or more drivers.
Resets the system.
Deletes one or more files or directories.
Displays, creates, changes, or deletes a UEFI environment variable.
Displays the current time. Also, it sets the system time.
Meaning
Description
510 C122-E110-10EN