Partition Configuration] Window; Figure 1.39 [Partition Configuration] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Message number
I_00013
I_00215
W_00418
E_00528
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
1.3.4

[Partition Configuration] window

You can set the SB, IOB, and GSPB configuring a partition in the [Partition Configuration] window.

FIGURE 1.39 [Partition Configuration] window

The displayed background color in the columns for unmounted SBs, IOBs, and GSPBs is gray.
Select the target partition by using the radio button on the left. Then, click the [Add Unit], [Remove Unit], or [Home]
button, depending on your intended setting.
Clicking the link to an SB, IOB, or GSPB displays the [SB#x], [IOB#x], or [GSPB#x] window, respectively.
If maintenance mode (Hot Partition Maintenance, Warm System Maintenance, or Cold System Maintenance) is
set, only the user who set maintenance mode can operate the partitions from this window. (The user has
Administrator privileges or is maintenance personnel.) In this mode, if a partition not under maintenance is selected,
a message will appear. This partition cannot be operated.
Setting completed.
There is a possibility that other users are using this %aa. Are you sure?
Unable to change the Partition#x's DVD connection because the DVD connection is
already assigned to Partition#x.
Unable to select the partition because of DVDB voltage abnormal.
Message text
132 C122-E110-10EN