Set Partition Name - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
Unable to change the mode while the partition is running. Please try to change the mode after the partition
is shutdown.
Failed to execute %s command.
Failed to execute set partition command.
The SB with DIMM that does not satisfy requirements of Mirror Mode is registered as a Reserved SB.
If you register this partition as a Mirror Mode, Mirror Mode will be disabled when switching to Reserved
SB.
Are you sure to continue?[Y/N]
Unable to register the specified Partition#%d as Mirror Mode enable because the CPU mismatch between
SBs.
Unable to register the specified Partition#%d as Mirror Mode enable because the DIMM does not satisfy
requirements of Mirror Mode.
Unable to register the specified Partition#%d as Mirror Mode enable because the unsupported CPU
configuration.
Unable to register the specified Partition#%d as Mirror Mode enable because of abnormal CPU
composition.
Unable to register the specified Partition#%d as Mirror Mode enable because of abnormal DIMM
composition.
Unable to register the specified Partition#%s as Mirror Mode enable because of abnormal SB composition.
Unable to register the specified Partition#%s as Mirror Mode enable because of abnormal VRM
composition.
2.2.24

set partition name

The set partition name command sets a name for the specified partition.
A partition name consists of up to 16 characters. You cannot set a partition name consisting of more than 16
characters.
When specifying a name that includes a space, enclose the name in quotation marks (").
You can use the following characters:
[a-z], [A-Z], [0-9], underbar (_), hyphen (-), number sign (#), space ( )
The default is no set name.
Privileges: Administrator
(1) Syntax
set partition name <partition#> <partition name>
(2) Options
None
(3) Usage example
247 C122-E110-10EN