Netck; Netck Stat - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
(5) Processing
The arping -l bond0 -c 1 <ip> command is executed.
2.3.31 netck ifconfig
The netck ifconfig command displays the network environment setup status (IPv4 or IPv6).
Privileges: All
(1) Syntax
netck ifconfig
(2) Options
None
(3) Usage example
#netck ifconfig
bond0 Link encap:Ethernet HWaddr 00:17:42:9B:D9:78
inet addr:10.24.77.80 Bcast:10.24.77.255 Mask:255.255.255.0
inet6 addr: 2001:2345::10/64 Scope:Global
inet6 addr: fe80::217:42ff:fe9b:d978/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:4765 errors:0 dropped:0 overruns:0 frame:0
TX packets:3438 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:637685 (622.7 KiB) TX bytes:1318710 (1.2 MiB)
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified parameter is invalid.
(5) Processing
The ifconfig bond0 command is executed.
2.3.32

netck stat

The netck stat command displays a list of port numbers being used by running processes.
Privileges: All
(1) Syntax
netck stat
275 C122-E110-10EN