Fujitsu PRIMEQUEST 1000 Series Tool Reference page 250

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
TABLE 2.4 MMB CLI commands (Partition Operator)
Command
Power control
power off
power on
sadump
reset
nmi
Partition creation
add partition
remove partition
show partition configuration
set partition home
show partition home
set partition mirror_mode
show partition mirror_mode
set partition name
show partition name
Time-related
set date
show date
set timezone
show timezone
Network-related
set ip
set ipv6
show ip
set hostname
show hostname
set gateway
set gateway_ipv6
show gateway
Partition Partition
Operator (*) Operator (*)
(Same (Other
partition) partition)
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted Permitted
Permitted Permitted
Permitted
Permitted Permitted
Permitted Permitted
Permitted Permitted
Permitted Permitted
Permitted Permitted
Permitted Permitted
218
Outline
Turns the power off.
Turns the power on.
sadump instruction (Japanese only)
Hard Reset instruction
NMI interrupt instruction
Adds a partition component.
Removes a partition component.
Displays the partition configuration.
Sets the Home SB.
Displays the Home SB.
Sets Mirror mode.
Displays the Mirror mode setting.
Sets the partition name.
Displays the partition name.
Sets the date and time.
Displays the date and time.
Sets the time zone.
Displays the time zone.
Sets the management LAN address.
Sets the IPv6 management LAN address.
Displays the management LAN address.
Sets the MMB host name.
Displays the MMB host name.
Sets the gateway address.
Sets the IPv6 gateway address.
Displays the gateway address.
C122-E110-10EN