PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Message number
E_00419
E_00420
E_00421
E_00460
W_00481
W_00492
W_00493
I_00494
W_00505
W_00520
W_00525
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
Upon the detection of multiple errors, a dialog box will display these errors.
1.3.6
[Console Redirection Setup] window
The [Console Redirection Setup] menu has the following windows:
[IPv4 Console Redirection Setup] window
[IPv6 Console Redirection Setup] window
[IPv4 Console Redirection Setup] window
You can set the IP address and the subnet mask for access to the IPv4 console redirection setup in the [IPv4 Console
Redirection Setup] window. You can also set whether to enable or disable video redirection, remote storage, and
text console redirection in this window.
Unable to register the specified SB#%s as a Reserved SB due to unsupported CPU
configuration.
Unable to register the specified SB#%s as a Reserved SB because the DIMM does not
satisfy requirements of Mirror Mode.
No change.
Unable to set the specified SB to the partition due to CPU composition abnormal.
Unable to register the specified SB#%s as a Reserved SB due to the home SB being TPM
enabled.
Unable to register the specified SB#%d as a Reserved SB due to Partition is Fixed I/O
Mode.
Unable to register the specified SB#%d as a Reserved SB due to abnormal DIMM
composition.
The DIMM does not satisfy requirements of Mirror Mode.
If you register the specified SB%s as a Reserved SB, Mirror Mode will be disabled when
switching to specified SB.
Are you sure to continue?
Unable to set configuration because the power on/off is processing.
Please execute it after a while again.
Unable to register the specified SB#%d as a Reserved SB due to abnormal SB composition.
Unable to register the specified SB#%d as a Reserved SB due to abnormal VRM
composition.
Message text
141
C122-E110-10EN