PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
Power LED
Alarm LED
Location LED
TABLE 1.36 Buttons in the [LEDs] window
Button
On
Off
Blink
Turn off all Location
LEDs
(1) Menu operations
[System] - [LEDs]
(2) Window operations
1. Click the [Turn off all Location LEDs] button.
All the Location LEDs in the system go out.
1.2.10
[Power Supply] window
The [Power Supply] window displays the PSU status for the PRIMEQUEST 1000 series system.
Once a detected error is shown for the status of a PSU, the display retains the error condition until the PSU is
replaced or the [Status Clear] button is clicked to clear the status.
Displays the power status.
Displays whether a unit is operating normally.
Displays and sets the status of the Location LED of a unit.
Click the [On] button to turn on the Location LED.
Click the [Off] button to turn off the Location LED.
Click the [Blink] button to cause the Location LED to blink.
Click the [Turn off all Location LEDs] button to turn off all the Location LEDs in the
system.
Description
Description
82
C122-E110-10EN