Fujitsu PRIMEQUEST 1000 Series Tool Reference page 229

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Button
Remove Filter
Cancel
(1) Menu operations
[Network Configuration] - [Access Control]
(2) Window operations
- Adding a new filter
1. Click the [Add Filter] button.
The [Add Filter] window appears.
2. Configure the filter in the [Add Filter] window. Then, click the [Apply] button.
This adds the new filter.
- Editing a filter
1. Click the radio button of a filter in the [Select] column so that you can edit the filter. Then, click the
[Edit Filter] button.
The [Edit Filter] window appears.
2. Edit the filter in the [Edit Filter] window. Then, click the [Apply] button.
- Deleting a filter
1. Click the radio button of a filter in the [Select] column so that you can delete the filter. Then, click the
[Remove Filter] button.
A deletion confirmation dialog box appears.
2. Click the [OK] button.
This deletes the filter. The browser returns to the [Access Control] window.
Messages
The following table lists the messages displayed in this window.
Message number
I_00013
E_00412
W_00413
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
[Add Filter]/[Edit Filter] window
Click the [Add Filter] button or [Edit Filter] button in the [Access Control] window to display the [Add Filter]
window or [Edit Filter] window, respectively.
Although the [Add Filter] window and [Edit Filter] window have different window titles, their setting items are the
same. This section describes these items in the [Add Filter] window.
Deletes the selected filter.
Restores the original information and does not set the specified information.
Setting completed.
You need an empty entry.
Nothing is selected.
Description
Message text
197 C122-E110-10EN