Set Partition Mirror_Mode - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
To set an SB as the Home SB, specify its SB number. If the specified SB does not exist, the command is not executed.
Privileges: Administrator
(1) Syntax
set partition home <partition#> SB <SB#>
(2) Options
None
(3) Usage example
Example: Setting SB#2 as the Home SB in partition 3
# set partition home 3 SB 2
#
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified partition number is invalid.
The specified SB number is invalid.
The specified SB#x is Not-present.
Unable to change the home SB while the partition is running. Please try to change the home SB after the
partition is shutdown.
Unable to execute this command on a standby MMB.
The specified parameter is invalid.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Succeed to set partition home command.
Failed to execute set partition home command.
Failed to execute %s command.
The specified command is not supported.(error=[%s])
2.2.23

set partition mirror_mode

The set partition mirror_mode command sets Mirror mode for the specified partition.
The default setting is disable (Mirror mode disabled).
If the power to the partition is already on when this command is executed, the following message appears, and
Mirror mode is not set.
"Unable to change the mode while the partition is running. Please try to change the mode after the partition is
shutdown."
245 C122-E110-10EN