Set Http; Set Http_Port - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified hostname is invalid.
Unable to execute this command on a standby MMB.
2.2.15

set http

The set http command enables or disables an HTTP server.
The default setting is disable (http disabled).
Privileges: Administrator
(1) Syntax
set http [enable | disable]
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Unable to execute this command on a standby MMB.
2.2.16

set http_port

The set http_port command sets a port to accept an HTTP session. The default is 8081.
The specifiable port numbers for <port> are 1024 to 65535.
Privileges: Administrator
(1) Syntax
set http_port <port>
(2) Options
None
(3) Usage example
None
240 C122-E110-10EN