Set Hostname - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
- Automatic setting
set gateway_ipv6 auto
(2) Options
auto: Automatically sets the IP address.
(3) Usage example
- Manual setting
#set gateway_ipv6 fe80::1
- Automatic setting
#set gateway_ipv6 auto
fe80::beef
Are you sure to continue?[Y/N]
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
2.2.14

set hostname

The set hostname command sets an MMB host name in FQDN format.
You can enter the following characters:
[a-z], [A-Z], [0-9], - (hyphen), . (period)
Also, the following restrictions apply:
- The character string must begin with an alphabetic character.
- The character string must not begin with a hyphen (-) or period (.).
The default setting value is "PRIMEQUEST" + Product Serial Number.
Example:
Serial number of 1020516004:
"PRIMEQUEST1020516004"
Privileges: Administrator
(1) Syntax
set hostname <host_name>.<domain_name>
(2) Options
None
(3) Usage example
# set hostname hogehoge.fujitsu.com
#
239 C122-E110-10EN