Alarm E-Mail] Window; Table 1.120 Buttons In The [Add Filter] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
Subnet Mask

TABLE 1.120 Buttons in the [Add Filter] window

Button
Apply
Cancel
(1) Menu operations
[Network Configuration] - [Access Control] - [Add Filter] button/[Edit Filter] button
(2) Window operations
1. Specify [Protocol] and [Access Control].
2. If you specify [Enable] in [Access Control], enter values for [IP Address] and [Subnet Mask]. Then, click
the [Apply] button.
If you specify [Disable] in [Access Control], simply click the [Apply] button.
This adds or edits the filter.
Messages
The following table lists the messages displayed in this window.
Message number
I_00013
W_00432
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
1.5.11

[Alarm E-Mail] window

You can set e-mail notification for when an event occurs in the PRIMEQUEST 1000 series server in the [Alarm
E-Mail] window.
(because the IP address is used with a 24-bit subnet mask)
- The above setting will enable access not only from the IP address 192.168.60.60,
but also from IP addresses within the subnet 192.168.60.0/24.
Sets the subnet mask of the IP address that has permission for connection.
Sets the specified information.
Restores the original information and does not set the specified information, such as
protocols and access control.
Setting completed.
Invalid IP Address specified.
Description
Description
Message text
199 C122-E110-10EN