Figure 3.19 Example Of [Add Sb/Iou To Partition] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)
4. Click the radio button of one SB/Memory Scale-up Board or one IOU to add it to the partition.
5. Only one SB/Memory Scale-up Board or one IOU can be selected by one operation.
6. Click the [Apply] button.
→ Confirmation dialogue box is displayed.
7. Click [OK] button.
→ The selected one SB/Memory Scale-up Board or one IOU is added to the partition.
Repeat procedure 2~6 until you have added all the required SBs/Memory Scale-up Boards or IOUs.
Example of [Add SB/IOU to Partition] Window
FIGURE 3.19
33
CA92344-0536-04