Show Wireless Ports Interface Client-Scan Results - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

show wireless ports interface client-scan results

show wireless ports [<portlist> | all] interface [1 | 2] client-scan
results
Description
Displays the current contents of the probe information table.
Syntax Description
portlist
all
interface
Default
N/A.
Usage Guidelines
The output of this command displays the probe information table, which has the following fields:
Variable
Intf
MAC address of the source
Probe REQs
Last RSS
Channel
Last Seen
Client
Example
The following example displays the probe information table for port 1:25 and interface 2:
show wireless port 1:25 interface 2 client-scan results
This command produces output similar to the following:
Intf Source
================================================================================
1:25:2 00:20:A6:4C:40:69 8005
1:25:2 00:09:5B:92:43:63 262
1:25:2 00:09:5B:68:27:A6 482
1:25:2 00:09:5B:66:ED:F3 390
1:25:2 00:09:5B:66:E4:C9 314
1:25:2 00:02:C7:FF:09:99 46
2090
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all active ports.
Specifies an interface: 1 or 2.
Description
Wireless port and interface on which this client is seen
MAC address of the source
Number of PROBE REQ packets seen from this source
RSSI of last received PROBE REQ packet
Channel on which last PROBE REQ was received
Time last PROBE REQ was seen from this source
Client is associated to the Altitude 300 (Y | N)
Probe REQs Last RSS Channel Last SeenClient
52
34
43
47
12
28
1 19:37:36 N
1 19:37:37 N
1 19:37:37 N
1 19:37:35 N
1 19:37:30 N
1 19:37:28 N
ExtremeWare Software 7.3.0 Command Reference Guide