Enable Syslog - Extreme Networks ExtremeWare Command Reference Manual

enable syslog

enable syslog
enable syslog
Description
Enables logging to all remote syslog host targets.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
In order to enable remote logging, you must do the following:
• Configure the syslog host to accept and log messages.
• Enable remote logging by using the command.
enable syslog
• Configure remote logging by using the command.
configure syslog
When you use the command, the exporting process of the syslog begins. This command
enable syslog
also determines the initial state of an added remote syslog target.
Example
The following command enables logging to all remote syslog hosts:
enable syslog
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 763