Configuring The Version Of Igmp Snooping - 3Com 5500-EI PWR Install Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

Although both Layer 2 and Layer 3 multicast protocols can run on the same switch simultaneously,
they cannot run simultaneously on a VLAN or its corresponding VLAN interface.
Before enabling IGMP Snooping in a VLAN, be sure to enable IGMP Snooping globally in system
view; otherwise the IGMP Snooping settings will not take effect.
If IGMP Snooping and VLAN VPN are enabled on a VLAN at the same time, IGMP queries are
likely to fail to pass the VLAN. You can solve this problem by configuring VLAN tags for queries.
For details, see

Configuring the Version of IGMP Snooping

With the development of multicast technologies, IGMPv3 has found increasingly wide application. In
IGMPv3, a host can not only join a specific multicast group but also explicitly specify to receive or reject
the information from a specific multicast source. Working with PIM-SSM, IGMPv3 enables hosts to join
specific multicast sources and groups directly, greatly simplifying multicast routing protocols and
optimizing the network topology.
By configuring an IGMP snooping version, you actually configure the version of IGMP messages that
IGMP snooping can process.
IGMP snooping version 2 can process IGMPv1 and IGMPv2 messages, but not IGMPv3 messages,
which will be flooded in the VLAN.
IGMP snooping version 3 can process IGMPv1, IGMPv2 and IGMPv3 messages
Follow these steps to configure the version of IGMP Snooping:
To do...
Enter system view
Enter VLAN view
Configure the version of IGMP
Snooping
Before configuring related IGMP Snooping functions, you must enable IGMP Snooping in the
specified VLAN.
Different multicast group addresses should be configured for different multicast sources because
IGMPv3 Snooping cannot distinguish multicast data from different sources to the same multicast
group.
Configuring a VLAN Tag for Query
Use the command...
system-view
vlan vlan-id
igmp-snooping version
version-number
Messages.
Optional
The default IGMP Snooping
version is version 2.
6
Remarks

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents