Configuring Igmp Snooping In A Vlan - 3Com Baseline 2928 PWR Plus User Manual

Table 1-2 IGMP snooping configuration items
Item
IGMP snooping
Return to IGMP snooping configuration task

Configuring IGMP Snooping in a VLAN

Select Network > IGMP Snooping in the navigation tree to enter the basic configuration page shown in
Figure 1-3. Click the
snooping in the VLAN, as shown in
Figure 1-4 VLAN configuration
Table 1-3 describes the items for configuring IGMP snooping in a VLAN.
Table 1-3 Items for configuring IGMP snooping in a VLAN
Item
VLAN ID
IGMP Snooping
Version
Globally enable or disable IGMP snooping.
list.
icon corresponding to the VLAN to enter the page you can configure IGMP
Figure 1-4.
This field displays the ID of the VLAN to be configured.
Enable or disable IGMP snooping in the VLAN.
You can proceed with the subsequent configurations only if Enable is
selected here.
By configuring an IGMP snooping version, you actually configure the
versions of IGMP messages that IGMP snooping can process.
IGMP snooping version 2 can process IGMPv1 and IGMPv2 messages,
but not IGMPv3 messages, which will be flooded in the VLAN.
IGMP snooping version 3 can process IGMPv1, IGMPv2, and IGMPv3
messages.
1-6
Description
Description