Server-Map Example For Http Origin; Service - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Administrator’s guide and cli command reference
Table of Contents

Advertisement

Media Flow Controller Administrator's Guide
test-vos (config server-map NFS1) # file-url http://mapfile.example.com/nfs/
path/filemapA.xml refresh-interval 300
test-vos (config server-map NFS1) #
Media Flow Controller would scan the URL, extract nfs_mnt1 and use this defined
namespace to index into the server-map file fetched from the set file-url. The fetched file
(filemapA.xml) would have an entry (or multiple entries) with nfs_mnt1 indicating the NFS
mount point.
See
"Chapter 7, "Server Map Configuration,"

server-map Example for HTTP Origin

For an incoming URL of http://www.example.com/vod/video1.flv, and a server-map
configuration of:
test-vos (config) # server-map smHTTP1
test-vos (config server-map smHTTP1) # format-type host-origin-map
test-vos (config server-map smHTTP1) # file-url http://mapfile.example.com/
vod/path/filemapB.xml refresh-interval 300
test-vos (config server-map smHTTP1) #
Media Flow Controller would scan the URL, extract www.example.com and use this defined
namespace to index into the server-map file fetched from the set file-url. The fetched file
(filemapB.xml) would have an entry (or multiple entries) indicating the location of the defined
origin-servers and corresponding HOST headers; the format-type tells Media Flow Controller
that this type of XML file is for HTTP origin.
See
"Chapter 7, "Server Map Configuration,"

service

Media Flow Controller service options.
service
flash-led ethernet [<count>]
restart <service_name>
Notes:
flash-led ethernet
many loops of flashing with <count>; up to 25 loops allowed.
restart
address or delivery protocol port change. For <service_name> you can use the following:
mod_delivery
mod_ftp
mod-log
mod_oom
mod_rtmp-admin
mod_rtmp-fms
show service [<name>]
List status of the of all services, or the specified service.
—Flash the Ethernet LEDs in sequence. Optionally specify how
—Media Flow Controller requires some services to be restarted after an IP
(Delivery engine)
(Media Flow Controller logging)
(Offline Origin Manager)
(RTMP administration service)
(FMS RTMP service)
Media Flow Controller CLI Commands
for additional examples.
for additional examples.
service
351

Advertisement

Table of Contents
loading

This manual is also suitable for:

Media flow controller 2.0.4

Table of Contents