Table 153: Show Ip Http Server Output Fields; Monitoring Statistics For Connections To The Http Local Server - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

host1#show ip http server
Table 153 on page 709 lists the show ip http server command output fields.
Meaning

Table 153: show ip http server Output Fields

Related Topics

Monitoring Statistics for Connections to the HTTP Local Server

Display statistics about the connections to the HTTP local server.
Purpose
To display statistics about HTTP local server with the baseline values subtracted:
Action
host1#show ip http statistics delta
Admin status: enabled
Access class: not defined
Listening port: 80
Same host limit: 3
Protocol: IPv6
Field Name
Admin status
Access class
Listening port
Same host limit
Protocol
show ip http server
Server enable count: 1
Server disable count: 0
Same host enforced: 0
Access class denies: 0
No resource failures: 0
Http connections created: 2
Http connections terminated: 2
Http connections aged out: 1
Urls successfully served: 0
Monitoring Statistics for Connections to the HTTP Local Server
Chapter 28: Monitoring Service Manager
Field Description
Status of the HTTP local server in the software:
enabled or disabled.
Enabled implies that the HTTP local server can listen
for IPv4 , IPv6, or both IPv4 and IPv6 exception
packets.
Name of a standard IP access list that determines
which hosts can log on to the HTTP local server
Port that the HTTP local server uses to track requests
for connection
Maximum number of connections allowed between
one IP address and the HTTP local server
Protocols that the HTTP local server is listening for:
IPv4, IPv6, or IPv4 and IPv6.
709