Overriding The Default Configuration Settings For The Extended Dhcp Relay; Agent (Nsm Procedure); Table 92: Group Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.4 - M-SERIES AND MX-SERIES DEVICES GUIDE REV 1 Manual

Overriding the Default Configuration Settings for the Extended DHCP Relay Agent (NSM
Procedure)
Copyright © 2010, Juniper Networks, Inc.
Add or modify settings as specified in Table 92 on page 189.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 92: Group Configuration Details

Task
Configuring authentication
support for the DHCP relay
agent.
Specify one or more
interfaces, or a range of
interfaces, that are within a
specified group on which the
DHCP local server is
enabled.
Overriding the default
configuration settings for
the extended DHCP relay
agent.
Configuring relay option 60
Information for forwarding
client traffic to specific
DHCP servers.
Configuring relay option 82
for a DHCP server.
You can override the default configuration settings for the extended DHCP relay agent.
Specifying the overrides statement with no subordinate statements removes all DHCP
relay agent overrides at that hierarchy level.
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, select Forwarding Options >
3.
DHCP Relay.
Select Overrides.
4.
Chapter 16: Configuring Forwarding Options
Your Action
See "Configuring Authentication Support for the DHCP Relay Agent
(NSM Procedure)" on page 187
1. Click Add new entry next to Group.
2. Expand Group.
3. Click Interface next to group.
4. Click Add new entry next to Interface.
5. From the Name list, select the name of the interface.
6. In the Comment box, enter the comment.
7. From the Upto list, select the upper end of the range of
interfaces.
8. Select the Exclude check box to exclude an interface or a range
of interfaces from the group.
See"Overriding the Default Configuration Settings for the Extended
DHCP Relay Agent (NSM Procedure)" on page 189.
See"Configuring Relay Option 60 Information for Forwarding Client
Traffic to Specific DHCP Servers (NSM Procedure)" on page 191.
See "Configuring Relay Option 82 for a DHCP Server (NSM
Procedure)" on page 192.
189