Monitoring The Calling-Station-Id Radius Attribute; Monitoring The Nas-Identifier Radius Attribute - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

To display information about the NAS-Port attribute on an ATM interface on an E320
Broadband Services Router:
host1#show radius nas-port-format extended atm
extended atm field-width slot 5 adapter 0 port 4 vpi 4 vci 12
To display the status of NAS-Port attribute settings for PPPoE interfaces:
host1#show radius pppoe nas-port-format
unique
To display the status of the S-VLAN ID setting for the NAS-Port attribute for VLAN
interfaces:
host1#show radius vlan nas-port-format
vlan stacked
Related Topics

Monitoring the Calling-Station-Id RADIUS Attribute

Display the format and delimiter used for the Calling-Station-Id [31] attribute.
Purpose
To display the format configured for the Calling-Station-Id [31] attribute:
Action
host1#show radius calling-station-format
fixed-format-adapter-new-field (includes SVLAN ID)
To display the delimiter used in the Calling-Station-Id for authenticated ATM PPP
users:
host1#show radius calling-station-delimiter
&
Related Topics

Monitoring the NAS-Identifier RADIUS Attribute

Display information about the NAS-Identifier value.
Purpose
To display information about the NAS-Identifier value:
Action
show radius nas-port-format
show radius nas-port-format extended
show radius pppoe nas-port-format
show radius vlan nas-port-format
show radius calling-station-format
show radius calling-station-delimiter
Monitoring the Calling-Station-Id RADIUS Attribute
Chapter 8: Monitoring RADIUS
299